Reply
Rocketfish Support
Posts: 623
Registered: ‎12-23-2011
0

Question 10: I have no video on my display.

  • Make sure your switcher is plugged in and turned ON.
  • Make sure your TV is set to the proper input.
  • Make sure that your DVD movie is original. Note: HDMI includes HDCP copy protection, which prevents playback of illegally copied movies.
  • Make sure that the HDMI cables are not broken and are securely connected.
  • Make sure that the audio and video formats of the content being used (i.e., Blu-ray disc) are supported by all connected devices.
  • Make sure that you are using high-speed HDMI cables for all connections.
Rocketfish Support
Posts: 623
Registered: ‎12-23-2011
0

Question 11: The video has some discoloration or flicker.

  • Make sure that the HDMI cables are not broken and are securely connected.
  • Make sure that you are using high-speed HDMI cables for all connections.
  • Make sure that the TV’s video resolution supports the video source’s output resolution.
Rocketfish Support
Posts: 623
Registered: ‎12-23-2011
0

Question 12: What do the LEDs indicate?

[ Edited ]
  • The green Input LED lights to indicate the selected device
  • The red Power LED lights to indicate the switcher is ON.
Rocketfish Support
Posts: 623
Registered: ‎12-23-2011
0

Question 13: The device’s LEDs are flashing.

  • Your device may be connected incorrectly. For steps on making connections, see your QSG.
  • Make sure all cables are securely connected.
Rocketfish Support
Posts: 623
Registered: ‎12-23-2011
0

Question 14: The power LED is flashing.

  • The power LED flashes when the switcher is detecting and connecting to a device.
  • If flashing continues:
    • Turn the switch box off and then back on.
    • Make sure all cables are securely connected.
Rocketfish Support
Posts: 623
Registered: ‎12-23-2011
0

Question 15: What is Auto-detect mode?

  • This mode will allow your HDMI switch box to automatically switch to the most recently powered-on device.
  • When a device is turned off, the switch box will automatically switch to the next device that is powered on or the next device following sequential order.

Note: Not all devices support auto-switching. If the switch box does not detect a device, use the remote control or manual controls.

Rocketfish Support
Posts: 623
Registered: ‎12-23-2011
0

Question 16: What is this product used for?

  • This Rocketfish 4-way HDMI Switcher will send the HDMI audio and video signals from up to four sources, such as a Blu-ray/DVD player or cable/satellite box, to one destination, such as a TV and A/V receiver.
Rocketfish Support
Posts: 623
Registered: ‎12-23-2011
0

Question 17: Can I get more information about the 4-Way HDMI Switcher?

[ Edited ]

Refer to your QSG or the Rocketfish product page: http://www.rocketfishproducts.com/products/home-theater/RF-HDMI4.html

Highlighted
Rocketfish Support
Posts: 623
Registered: ‎12-23-2011
0

Question 18: Where can I find more information about my warranty?

[ Edited ]