Reply
Newbie
Posts: 1
Registered: ‎03-01-2014
0

Re: Odd problem with RF-G1185 HDMI switch

I just bought my switch and am having the very same problem.  My TV is a JVC HD-ILA  (HD-52Z585).  Everytime I turn on the TV (connected to Bell Expressvu satelite receiver) I have to play with the Rocketfish remote in order to get a signal to TV.  Extremely anoying - now have to turn on TV, turn on satelite receiver and turn off/turn on HMDI switch.

Rocketfish Product Specialist
Posts: 262
Registered: ‎10-15-2013
0

Re: Odd problem with RF-G1185 HDMI switch

[ Edited ]

Hello guycomo,

Welcome to Community@ Rocketfish™!

The only thing I can really add to what was in the other thread is to try a HDMI reset to see if that will fix the handshake issue.  Unplug everything from the power.  Disconnect all HDMI cables from everything.  The I need you to reconnect the HDMI cables only.  Next is the important part.  Plug in the Bell Satellite box first and give it a minute to boot up.  Next plug in the HDMI switch and give it a few seconds to boot up.  The last thing to plug in is the TV.  That will reset the handshake and hopefully solve the issue. 

Regards,
Jeremy
Rocketfish™ Support

Newbie
Posts: 2
Registered: ‎04-13-2016
0

Re: Odd problem with RF-G1185 HDMI switch

I went into my Panasonic TV settings and turned the "ctl HDMI" from on to off and now my RF-G1185 stays on all the time. 

Highlighted
Newbie
Posts: 1
Registered: ‎02-10-2017
0

Re: Odd problem with RF-G1185 HDMI switch

Thanks exactly the answer i needed