Reply
Newbie
Posts: 1
Registered: ‎03-02-2015
0

Re: RF-MAB2 Replacement Ear Pads

The link that you posted doesn't work for me. It tells me connection refused.
Rocketfish Support
Posts: 157
Registered: ‎07-21-2014
0

Re: RF-MAB2 Replacement Ear Pads

Hello sanderjm,

Welcome to Community@ Rocketfish™!

If you go directly to www.partstore.com and searc for part # HPBT01MAB2 it should direct you to the correct product page.

Regards,
Jon
Rocketfish™ Support

Newbie
Posts: 2
Registered: ‎08-20-2014
0

Re: RF-MAB2 Replacement Ear Pads

Yeah, I went to the site and nothing, not even querying RF-MAB2 gets you any parts.  Come, Rocketfish, get off your lazy butts and provide a solution here !!!!!!

Newbie
Posts: 2
Registered: ‎08-14-2014
0

Re: RF-MAB2 Replacement Ear Pads

I tried...I clicked on the link, copy and pasted the part number and this is what I got... "Your search for "HPBT01MAB2" did not return any results". Seriously disappointed.

Newbie
Posts: 2
Registered: ‎04-13-2015
0

Re: RF-MAB2 Replacement Ear Pads

Yep same here. search at the parts store yeilded no results. Please help!!!

Newbie
Posts: 4
Registered: ‎12-18-2014
0

Re: RF-MAB2 Replacement Ear Pads

JennD, don't waste your time, just order good quality round pads. They'll stretch into the frame that holds the pad. It doesn't look as the original, but it does the job and they cost about $1.00 for 8 pads I believe. You can get them at ebay
Report Inappropriate Content
Message 14 of 26 (519 Views)

Newbie
Posts: 2
Registered: ‎03-30-2015
0

Re: RF-MAB2 Replacement Ear Pads

Fortunately for me, I found the extra set of pads that came with my headset. But, when these wear out I’ll be getting rid of the Rockfish headset!

Newbie
Posts: 2
Registered: ‎04-13-2015
0

Re: RF-MAB2 Replacement Ear Pads

I bought ten 40 mm round ear pads from eBay for like $2, they work perfectly.
Newbie
Posts: 1
Registered: ‎07-15-2015
0

Re: RF-MAB2 Replacement Ear Pads

I did find the pn: HPBT01-BLK on www.PartsStore.com

 

The pads look way nicer than the RocketFish pads (it's abviously the same device (MD-HPBT01-BK)

 

I think I'm going to try them out.

 

-ACC

Newbie
Posts: 1
Registered: ‎06-24-2017
0

Re: RF-MAB2 Replacement Ear Pads - R&R procedure

For those of you that have found replacement pads, the pad is retained by a plastic ring that is clearly visible after you tear off the old pad.  There is an arrow in the ring to turn clockwise, that is for putting it back on.  turn counter-clockwise to take it off, or just pry up on one side and it will pop off.  Line up the new pad with the two Keyways on the plastic ring, and with pressure, placing the keyway into the non-lock position, turn clockwise to lockin place.